Supra Forums banner

1 - 6 of 6 Posts

·
Acting my age
Joined
·
3,968 Posts
Discussion Starter #1
Hey Y'all

We just finished putting in our 7MGTE with R-154... Everything seems great except the tranny will not go into any gear. The tranny is good because is worked before and we have checked the clutch fluid.. The clutch piston is working as well.. What else should we be checking? Any ideas appreciated!!

Thanks!
Matt
 

·
Premium Member
Joined
·
4,409 Posts
backwards clutch? freind is having the exact problem...
 

·
VIVA LA M.A.S.H. Midwest
Joined
·
1,451 Posts
Well to assemble the tranny and engine, you have to pull the clutch fork and pin... and then reassemble when the two are mated together.
Check to make sure every thing is ok with that first....
Let us know!
 

·
Flying Dutchman Pilot!
Joined
·
2,171 Posts
if its a new clutch and/or flywheel, you might have to re-adjust it. I had the same problem, it was very diceptive. I had to adjust it so far, it seemed as if there my have been an actual installation problem, but it turned out to just need adjusting. If thats not the problem rebleed the system.
 
1 - 6 of 6 Posts
Top