Supra Forums banner

tried everything i know. need help

711 views 12 replies 4 participants last post by  xpadawonx 
double check to make sure you installed the distributor right on.
Bring up the #1 cylinder and make sure your timing mark lines up as well as the distributor and the over haed cams. I had same prob when i did mine.

I was a hair off on distrib removed it then reset it. started right up.
 
Make sure your cam gears line up with the marks on the back plate behind it.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top