Supra Forums banner

tried everything i know. need help

719 views 12 replies 4 participants last post by  xpadawonx 
Make sure you're at TDC on #1 before installing the CPS, if you only go by the timing marks you may think you're at TDC when in reality you're 180 out. In my experience the engine would still fire 180 out but wouldn't idle or run.

Hope this helps.

Lata
 
Spoolme said:
you can stick a long screw driver in the #1 spark plug hole and turn it crank pulley till the screw driver comes all the way up.

yeah, just make sure it's something like a screwdriver that can't completely fall in your cylinder if you're not at TDC.......that leads to LOTS of cussing......and more than likely a nice head removal.....

Lata
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top