[Frankenstein]

I am putting together a NA-T kit and was wondering:

With the exception of the pipe nearest the intake where the BOV will be, can the rest of the intercooler piping be done in silicone piping or do I need to use hard pipes?

If I need to add a couple additional injectors, where are the injectors mounted and how are they controlled?

Thanks,
Scott

 

[theman]

I would recommend using as much hard pipe as possible... You can use an Additional Injector Controller, HKS and GReddy have pretty good ones. You should check with Toyomoto and PHR, I think they both know just about everything you'll need for the N/A turbo setups...