[Jay-450]

Hi all,

I recently shot blasted my TT Calipers, unfortunatly I forgot to bung up the Fuild hole! (Doh!)

I have a recon kit for them ready to go on, what do you reccomend I do To clean them out? Ie what should I use and the procedure?

Cheers.

M-Jay

 

[Boost Me]

You can use brake parts cleaner in the aerosol can to get the glass beads/sand out of the passage ways. Then, just use a compressed air source to blow out any remaining contamination. Make very certain that you get all the contamination out or you will be fighting brake problems forever.

 

[Jay-450]

You can use brake parts cleaner in the aerosol can to get the glass beads/sand out of the passage ways. Then, just use a compressed air source to blow out any remaining contamination. Make very certain that you get all the contamination out or you will be fighting brake problems forever.

Thanks thats good advice!