Supra Forums banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
3,328 Posts
Discussion Starter #1 (Edited)
Turbonetics T-37169
70mm with 4" Inlet, .55 compressor exducer, .70AR exhaust housing with 3" Vband, T4 Flange, Ball Bearing - 1000 miles and dynotime. $1000USD SHIPPED
Notes - Has been coated in the past but could be recoated for $75 and polished for $75




Turbonetics PHR Spec 4" Compressor Housing, 67mm 3 years old with less than 2k miles of driving, break in and dynotime. .70AR exhaust, T4 Flange, tapped for Boost and EGT. $600USD SHIPPED
Notes - Has been coated in the past but could be recoated for $75 and polished for $75





Garrett GT42R (80mm) Almost new, 5" Intake, T4 Flanged Divided, 4" Exhaust Vband, Newly Polished and heat coated, 100 miles or less on street and dyno
$2100USD shipped






Thanks,
Joe
 

·
Making a ComeBack!
Joined
·
1,058 Posts
Pix of the below to [email protected]

Garrett GT42R (80mm) Almost new, 5" Intake, T4 Flanged Divided, 4" Exhaust Vband, Newly Polished and heat coated, 100 miles or less on street an

Can u also add the specs on the a/r
 
1 - 3 of 3 Posts
Top