Supra Forums banner
1 - 1 of 1 Posts

·
2JZ swapped!
Joined
·
878 Posts
Sweet thanks guys! Anything to worry about #3 exhaust being so far out while the rest are in spec? Just strikes me as odd.
Nah nothing really to worry about as long as you know none of the valves are bent. A bent valve could pull the valve down alittle and give you a bigger gap. Bending a valve in a 2j is pretty hard to do considering these are non-interference motors. You just need a thicker shim.
 
1 - 1 of 1 Posts
Top