i have a 94 tt and the valve seals went and i got a price from toyota and some other places and they are all are around 1000-1500$. So im going to do it myself. I built a few american motors so we will see. Can anyone help me out with what is the easiest way to do it on this car and what am i getting myself into.
valve seals
1 - 5 of 5 Posts
Joined
·
4,911 Posts
its not too bad. take it apart like your doing a t-belt.
take the cams out
take the buckets out.
then if you have a air compressor and a compression tester, use you compression testers hose and your air compressor to keep the valves up while you take the springs out and change the seals.
if you don't feel comfortable doing it like this then you can use a rope in the cylinder like it shows on MKIV.
sorry if i forgot anything, its late.
take the cams out
take the buckets out.
then if you have a air compressor and a compression tester, use you compression testers hose and your air compressor to keep the valves up while you take the springs out and change the seals.
if you don't feel comfortable doing it like this then you can use a rope in the cylinder like it shows on MKIV.
sorry if i forgot anything, its late.
Joined
·
4,014 Posts
1 - 5 of 5 Posts
Join the discussion
Join now to ask and comment!