Supra Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
591 Posts
Discussion Starter · #1 ·
I wired my safc into my vpc harness and installed, turns over, revs up and cuts off. I have searched and tried all the fixes but nothing. Can I unwire my safc rewire #66 to pin #66 and run just the vpc to make sure it is not the cause?
 

·
Registered
Joined
·
374 Posts
Just bypass the AFC entirely by running #66 from the VPC directly to the ECU and then the AFC won't be doing anything.
 

·
Registered
Joined
·
591 Posts
Discussion Starter · #6 ·
I beleive all of my settings in the safc are correct, but what do you set the sensor type for with the vpc, leave it hotwire or go to pressure
 

·
Registered
Joined
·
591 Posts
Discussion Starter · #8 ·
Thanks guys, I got it running,I must have screwed up the safc numbers, I was sweaing bullets thought my cheap vpc may have been bad.
 

·
Registered
Joined
·
3,688 Posts
FASTEDDIE said:
Thanks guys, I got it running,I must have screwed up the safc numbers, I was sweaing bullets thought my cheap vpc may have been bad.
Glad you got it running. Hope my advice helped.
 
1 - 9 of 9 Posts
Top