D
dewsupra
·Guest
Joined
·
0 Posts
Can someone please tell me what values of
diodes or resistor to hard wire the vpc in with .
diodes or resistor to hard wire the vpc in with .
vpc
Join the discussion
Recommended Reading
-
High rpm breaking up 97 supra 6psi
MKIV TechnicalWell I’ve been reading all this post about ignition breakup at 15 -20psi and spent a good amount of hours reading and then trying things here and there. Well this is my problem it’s a 97 supra gte/w58 with an aem v2 with an sxe 366 ONLY doing 6 psi(STILL ON A W58). It will be fine in 2nd gear go...- 15
- 390
-
Performance shops in VA/MD
MKIV TechnicalCan someone help me out I’m looking for a good shop near Newport News area or Baltimore area that specializes in supras. I’m will to travel an hour and half away tops in both areas. During the week I’m in VA and weekend MD. I just want a look over make sure there’s no major issues that I...- 0
- 39
-
Need help! Bought doors with deleted door handles
MKIV TechnicalHello! I recently bought a jza80 supra! I was super siked about it! But it was not perfect. The passenger door was totally busted! So I bought some doors off of a nice german guy but upon further inspection I found out that the outside door handles where welded shut and painted over. So now I’m...- 3
- 149
-
Haltech elite 2500 plug and play patch HELP for JDM 2jzgte
MKIV TechnicalHello, I will be purchasing a 2500 elite series ecu kit. Its the HT-151342 I own a JDM 1994 Supra RZ 6spd. I'm told the patch harness that comes with this is suited for the USDM cars. What exactly do I need to do to my JDM 2jzgte engine harness so that the ecu works as it should. Thanks!- 0
- 52
-
rallly · updated
-
2jz TT and final drive questions
MKIV TechnicalHi guys, I am owner of a Supra jza80 TT, JDM spec, v161 and A03b differential. Since I have a second differential A03b that I don't use, I want to use it to mount a 2-way lsd, and a shortened final drive. I wanted to know if it is possible to install the 3.77 final drive coming from the Supra...- 1
- 99
Join now to ask and comment!