Supra Forums banner
1 - 12 of 12 Posts

·
Registered
Joined
·
2,028 Posts
Discussion Starter · #1 ·
I have a BL turbo kit with a 4 bolt 50mm wastegate. I am thinking of going with a precision or tial wg but they have an 3" v-band flange. Where can I get an adapter? BL has one but wanted to see if there are other companys that make them?
 

·
Registered
Joined
·
2,028 Posts
Discussion Starter · #3 ·
Yes, the manifold has been installed for sometime now. I am just trying to get away from having to cut my manifold to weld the v-band flange.
 

·
Registered
Joined
·
1,249 Posts
i went through this same problem a while back , the adapter might give you clearence problems between the downpipe and the wastegate. I ended up taking out the manifold and just said fuck it , welded the flange my self .
 

·
Suprasarous Y0!
Joined
·
1,116 Posts
Boost logic sells the adapter for $100. I was also too lazy to tear everything apart. Its nice though if you ever want to go back to a 4 bolt hks down the road. I'm actually in the process of doing it right now.
 

·
Registered
Joined
·
2,028 Posts
Discussion Starter · #6 ·
Boost logic sells the adapter for $100. I was also too lazy to tear everything apart. Its nice though if you ever want to go back to a 4 bolt hks down the road. I'm actually in the process of doing it right now.
Do you have a picture of it? I went to their website and could not find a picture of the adapter.
 

·
Suprasarous Y0!
Joined
·
1,116 Posts
Call them its not on their site and no i installed it before I could take a picture.
 

·
Registered
Joined
·
299 Posts
I got the same problem but the only thing is that I have a 4 bolt WG and the manifold has 44mm v-band wastegate outlet
 

·
Registered
Joined
·
4,774 Posts
I got the same problem but the only thing is that I have a 4 bolt WG and the manifold has 44mm v-band wastegate outlet
either sell your wastegate and get the right one or get to welding.
 

·
Hardtopper
Joined
·
2,478 Posts
1 - 12 of 12 Posts
Top