What performance can I expect from SP-57?
1 - 8 of 8 Posts
Z
Zerosoul
·Guest
Joined
·
0 Posts
ass kickin performance
Joined
·
11,270 Posts
We have run 11.0 at 128 with it on stock fuel!
Lar
SP
Lar
SP
Joined
·
124 Posts
I doubt it was on pump gas. Very impressive nonetheless.randy said:WOW!!!! Must be amazing! 11sec on pump gas. What about 0-60mph? I really enjoy and want strong take offs!!
www.Sound-Performance.com
Depends...actually the Greddy T78 would be the best all around. The price being the main attraction. I've recently spoken to two people who has experience with the T78 and an SP kit. Both say the T78 performs just as good if not better. Don't take my word for it. Find out for yourself by asking around or find someone with an SP kit, PHR kit, Greddy T78/T88, and an RPS kit and ask for a ride. Either kit will make you happy. Its all about how much you want to spend!
Depends...actually the Greddy T78 would be the best all around. The price being the main attraction. I've recently spoken to two people who has experience with the T78 and an SP kit. Both say the T78 performs just as good if not better. Don't take my word for it. Find out for yourself by asking around or find someone with an SP kit, PHR kit, Greddy T78/T88, and an RPS kit and ask for a ride. Either kit will make you happy. Its all about how much you want to spend!
Joined
·
1,522 Posts
The SP 57 has less lag than the stock twins.
1 - 8 of 8 Posts
Join the discussion
Recommended Reading
-
Boost cut controller.. why no worky
MKIV TechnicalAre you guys using a sensor ground for your bcc or chassis ground? I don't want to cut my harness so came up with this rough contraption. Something so simple yet 14-15 lbs boosts cuts every time. I started at 4.30v, kept turning it down after pulls to see if that was the case and nope still...- 2
- 84
-
Help with Cams and shimless buckets 2JZ-GTE
MKIV TechnicalWill be installing 272 BC cams, springs, retainers, keepers and of course those pesky oem seals. Still a bit confused on when I need to put motor at TDC since I am doing the "rope trick" does this matter? So would you do shimless buckets like this? Please correct if wrong. 1.Remove the...- 1
- 95
-
rallly · updated
-
Head gasket
MKIV TechnicalDoes this gasket look blown? enough to actually loose compression to zero?- 2
- 182
-
Kennygee · updated
-
Odometer problems need help!
MKIV TechnicalSo my odometer stopped working and i have resoldered it 2 times and everytime, it starts counting for about 5km and then stopps again. I have done the splice mod on the connector on the back also have tried putting it back to original and also tried removing my speedo converter but it didnt...- 2
- 158
-
Marcus.supra · updated
-
2JZ-GTE Igniter - Required when you go to a aftermarket harness + ECU
MKIV TechnicalI came across asking myself today, do you need a igniter when you go to a aftermarket ECU and Harness? I noticed my friend is running a MOTEC and does not have one for his car.- 1
- 160
Join now to ask and comment!