Supra Forums banner
1 - 1 of 1 Posts

·
silvermkiv
Joined
·
448 Posts
Beautiful car and engine bay! I think most singled cars are using the ngk 3330's. Just play around with the gap. Probably start around .032 and see if it misses at high boost/high rpm's then go down from there. Im at bpu+ with exhaust cam gear set to -4.5 running a tight .030 gap. Idle is a little rough, but it doesn't miss at the higher rpm's with boost cranked to 1.4 bar.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top