Joined
·
2,832 Posts
I was just wondering if having a single turbo (t67) limits your options as far as a strut bar goes? If it does, which strut bar will fit, also will a Cusco CF strut bar fit?
What Strut Bar will fit?
1 - 3 of 3 Posts
Joined
·
1,421 Posts
I think it depends on the manifold you are running. My BL manifold sits very low. Search and I'm sure you will come up with some answers.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
What did you do to your MKIV today
MKIV (1993-1998)As many of you know I have great appreciation for the Supra especially the MKIV as it has always been one of my dream cars come true. I purchased my MKIV in September of 2006. I wanted to attend my first SILV in it in 2006, a good year for SILV as it was a big attendance. Although it was a rough...- 5K
- 633K
-
Rocketman1000R · updated
-
Any successful 6R80 swaps into an MKIV yet?
MKIV (1993-1998)I know there was some talk at one point, but has there been any successful 6R80 swaps into a MKIV yet? We know the stock 6R80 can handle plenty of power, the mustang guys see plenty of 10 sec passes and even some into the 9s. We know the tunnel will need a massage, we know there's the...- 42
- 5K
-
Casey James · updated
-
Jdm 2jz ge non vvti code 24/31 start & stall
MKIV (1993-1998)anyone know what could going on? car starts idles high then stalls almost immediately or as soon as you press throttle stalls. JDM 2jzge non vvti. installed new plugs new wires distributor cap rotor button valve cover gaskets to no avail. car is throwing codes 24 & 31 but my car doesn't have a...- 0
- 18
-
AEM Infinity 506 and fuel pump wiring HELP
MKIV (1993-1998)Hey guys, about to install my AEM infinity 506 on my 1993 JDM RHD supra 6 speed turbo. I had the AEM V1 for 3 years and it's time for a change. Currently have a walbro 450 pump in 12V mode (no relay) just spliced 2 wires together by the fuel pump ECU. Was installed like this by a shop. I have...- 0
- 14
-
Put on pulled off head gasket
MKIV (1993-1998)New to the forum but have a question about reusing a head gasket. I bought a 2jz ge engine and the previous owner was going to put a turbo on it so he had the head all redone, springs, valves the works and put the redone head on the old ge block with a new GTE head gasket. When I bought the...- 1
- 50
-
Hairry7899 · updated
Join now to ask and comment!