Supra Forums banner

1 - 11 of 11 Posts

·
Now with 0JZ
Joined
·
1,185 Posts
Discussion Starter #1
I pulled my 1JZ out of my JZA70 to do some bottom end work on it, and noticed there's a line coming from the gas tank into a charcoal canaster. That makes sense, but then there's another line leaving the canister, and going right into the front crossmember. What the hell is that for?
 

·
Registered
Joined
·
184 Posts

·
Now with 0JZ
Joined
·
1,185 Posts
Discussion Starter #5
No I don't know it generates vacuum. It looks like a vacuum hose, so that's what I called it.


Why does it vent into my crossmember?
 

·
Registered
Joined
·
4,823 Posts
basically just a vent. i removed my charcol canister, capped off the lines and put on a vented gas cap, problem solved
 

·
Now with 0JZ
Joined
·
1,185 Posts
Discussion Starter #9
actually, funny you mentioned the vented gas cap. Even with this charcoal canister, my gas tank builds up pressure inside of itself. Whenever I take off teh cap, I get a pig psssssh as it depressurizes. Maybe I should see if something's blocked.
 

·
Supra Fan
Joined
·
4,115 Posts
its the vent line for the canister. [/thread]
 

·
Hardtop FTW
Joined
·
1,784 Posts
The MA70 has one too that runs into the fender directly underneath the CC.

Collin
 
1 - 11 of 11 Posts
Top