Supra Forums banner
1 - 10 of 10 Posts

· Registered
Joined
·
325 Posts
Discussion Starter · #1 ·
Guys,one last question for you..

18x9 and 18x10 HREs is what I have ordered..

HKS HiperMax RS Coilovers I have also ordered for suspension

What tire size should I use with stock fenders and I am just going to do a clean drop.. I am not rolling my fenders!!!


Thanks guys.. Josh...
 

· Registered
Joined
·
325 Posts
Discussion Starter · #3 ·
Thanks Dave!
 

· Registered
Joined
·
169 Posts
Where does it rub? My rear wheel 18x11(offset 38mm) wear 295/30 doesn't rub at all on a stock body. The inner fender might be questionable because of the unfinish spray.
 

· 95 Hardtopper X 2
Joined
·
2,034 Posts
18X11 +38 and no rubbing :rolleyes:
 

· Registered
Joined
·
1,755 Posts
OK, but what tire- #5 is running a 295/30. That's one flippin wide tire. Again, back-up these claims with some pics. I understand that some tires in the same size class may run a little narrower than others but with an offset less than 40 you are really pushing that rubber out.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top