What turbo to buy for 6spd T88? | Supra Forums

1 - 1 of 1 Posts

S

supra33

·

Guest

Joined Jan 1, 1970

·

0 Posts

Discussion Starter • #1 • Mar 31, 2002

I am considering going single, but need more info. I have a downpipe, exhaust, turbo timer, fuzzy boost control(which can be sent up to 25psi) . I am thinking about the T88, but want to know what else I need and the cost of the parts. like VPC. and will fuzzy boost gauge I have work? An turbo I looked at that was resonably priced was at directed Engineering. anyone have any experince with these turbos? Also what is the spool up on both. With this much power will I need bigger wheels/tires?
\

Thanks

1 - 1 of 1 Posts

Recommended Reading

Las Vegas NV Supra shop

Shops & Part Reviews

I’m probably posting this in the wrong section sorry. Tried to search for any shops in the Las Vegas area and have only heard about virtual works racing. Are there any other shops? I need to get my AC working and I’m going to a single setup. Getting it tuned and etc. any help would be...
- 2
- 144
- M
  matt20 · updated 12 d ago
TB Developments 3.5"catback - New product!!

Shops & Part Reviews

Hey guys, I would like to share the results of Timothy Bills work @ TBdevelpments. TB Developments When Tim started making down- and midpipes for our platform I had to have one. Not sure if they were worth their price, I've found a in new condition 2nd hand downpipe. I was blown away with the...
- 9
- 636
- CasperMK2 · updated 23 d ago
MOJO PERFORMANCE LQ9 /ls2 coil Install / review

Shops & Part Reviews

I have a 2jz in my 95 s14 with a s366 ,1050 cc injectors ,haltech sp2000 . Once I finished the swap I ran it at 15 psi no issues at all ! I started to up the boost towards 20-22psi and had some break up .. Gapped plugs to .22 and still same issue. So I bought a hks dli brand new !! still did...
- 709
- 189K
- B
  BooZTD3 · updated 1 mo ago
SRD Tuning Undertray Review

Shops & Part Reviews

With my ETS 4" core intercooler there was no way for me to run the stock undertray. The intercooler dips down too low and I would have had to hack up expensive factory OEM pieces to the point where they would look awful and be less sturdy. I know this because that's what a prior owner tried to...
- 6
- 443
- fastfalcon94 · updated 2 mo ago
Garrett G25-660 0.92 v-band in/out

Shops & Part Reviews

Hello all. Normally I don't bother with reviews, because I was dealing with established and well reputed businesses or products, so there wasn't much point. I suppose the same can be said of Garrett, they make good stuff, so why the review? Background on my car, I built it for road racing. Car...
- 18
- 2K
- T
  te72 · updated 2 mo ago