Supra Forums banner

wheel fitment ----

612 views 2 replies 1 participant last post by  narco 
G
#1 ·
Sup guys,

I know there is a sticky with a really great spreadsheet for fitment.

My question, I have a set of Volk TE37's. Front wheels are 18x9 with 40mm offset and rear wheels are 18x10.5 with 45mm offset.

I know these are 1cm off from ideal offset, (cant get them with 50, 55)

Do you think it would be possible to get away with 265/35 front tires and 285/30 or 295/35 for the rear? How much room can be obtained from clipping/rolling the front and rear fenders?

Do you guys know any GOOD shops that can perform the cutting/rolling in the N/E?

Thanks in advance,

Narco
 
#2 ·
The 265/35 will not work in the front. A 255/35 will be very close with a 40mm offset. A 295/30 will not work on the rear without rolling/cutting the fender lip and 285/30 will be very close. I would go with a 255/35 front and 285/30 rear combo.

Later, Steve
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top