Supra Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
451 Posts
Discussion Starter #1
going to try and help out a fellow supra owner.
He removed the injector clips for the injectors without marking which clips go to which injectors. If I remember correctly the clips come out from the wireing harness 2 at a time. ie- injector 1 and 2 wires emerge from the harness at the same place so I would not know which one to install on injector #1 and 2. the same for injector 3 and 4, 5 and 6.
any thoughts? help!

Thanks
Steve
 

·
Registered
Joined
·
451 Posts
Discussion Starter #3
yes I have.
I see the part that outlines the iunjectors under the electical section
http://www.cygnusx1.net/supra/library/TSRM/d/D_04.html

How do I read the colors for the wires?

it looks like colors w-l are used for injectors 1 and 4
color w-r for 2 and 6
and w for 3 and 5

is w=white
l=?
andr =red
if so that would make sense because if injector clips 1 and 2 were together I would know that injector 1 uses w-l and injector 2 uses w-r.
Am I on the right path here?

Thanks
Steve
 

·
Registered
Joined
·
451 Posts
Discussion Starter #5
cool
so it sould be something like
w-l= white wire with a blue stripe to injectors 1 and 4
w-r is a white wire with a red strip to injectors 2 and 6
a white only wire to injectors 3 and 5

is that correct?
Thanks
Steve
 
1 - 5 of 5 Posts
Top