Supra Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
154 Posts
Discussion Starter · #1 ·
Does the main reinforcement bar need to be removed? I have tried to prefit the bumper with the reinforcement bar in place but the problem is when I need to fasten the new bumper to the top mounting bar (where it meets the hood) it ends up being about an inch short of reaching. I have also tried to fit the bumper without the reinforcement bar but that brings up other problems. Have any of you had similar problems?

Thanks
Rob
 

· Registered
Joined
·
795 Posts
I think you do have to cut out the bar in the front. I've heard the ero and j-spec Supra's don't have that bar in the front. Something about US crash testing. I would want to have something welded back in it's place.
 

· Tartan Pimpernel
Joined
·
267 Posts
all supras have the front crash bar AFAIK

I`ve a Jap spec supra and it has one, and I`ve friends will euro spec supras and they all have the bar too.



-c-
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top