Joined
·
647 Posts
Anyone looking at selling?
-c
-c
Who wants to sell their N/A?
1 - 6 of 6 Posts
Joined
·
5,059 Posts
Depends if the price is right 
H
hsk73
·Guest
Joined
·
0 Posts
Me too.I think I'm pretty close to getting a TT.
Danny
I think I'm pretty close to getting a TT. Danny
Joined
·
647 Posts
9
95SupraSE
·Guest
Joined
·
0 Posts
I might be willing to sell. 95 N/A supra SE. No modifications. E-mail me at [email protected] if interested
Joined
·
81 Posts
I'm selling my 94 NA auto w/80K. Just pick up a 93.5 TT 6spd Hardtop BPU w/66K this week. One word describe the TT "WOW"
Jason Kim
http://www.autotrader.com/findacar/vdetail.jtmpl?car_id=75825494&dealer_id=&max_price=&start_year=1993&end_year=1998&address=75007&search_type=used&make=TOYOTA&model=SUPRA&distance=30&car_year=1994&ac_afflt=none
Jason Kim
http://www.autotrader.com/findacar/vdetail.jtmpl?car_id=75825494&dealer_id=&max_price=&start_year=1993&end_year=1998&address=75007&search_type=used&make=TOYOTA&model=SUPRA&distance=30&car_year=1994&ac_afflt=none
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Waste-gate stuck open?
Naturally AspiratedI'm pretty sure this is a no brainier, but I had my car running up in the air on a lift after doing some repairs and inspecting. I noticed that the dump tube off of my waste-gate is puffing. Am I right to assume that the waste gate should not let anything past until it's spring pressure is...- 9
- 92
-
TrueGS300 · updated
-
IS300 Coil Pack brackets for NA Supra?
Naturally AspiratedHi supraforum'ers, Does anyone know where I can buy some simple brackets that secure the IS300 coil packs in our non-vvti 2JZ-GE engines? I performed this coil pack conversion from a distributor cap and am planning a road trip, so I prefer them to be bolted down in a secure manner. :)- 5
- 287
-
NA-T high increasing idle after IS300 coil pack conversion AEM v1
Naturally AspiratedHi Supraforum'ers, Has anyone experienced a high idle 2500 rpm + (that keeps increasing) after you converted from distributor to the IS300 coil packs with AEM EMS v1 (or similar engine management system)? I set the base ignition timing with AEMPower's wizard, and made sure the throttle body...- 7
- 334
-
Fuel pressure
Naturally AspiratedI just got my return fuel system finished up and am having an issue with setting fuel pressure. I ran a Walbro 525 pump with an 8an feed and 6 an return. FuelLab regulator on the return, with a Radium Engineering gauge. All parts high quality. I can't get the gauge to read past 20psi. The car...- 6
- 158
-
TrueGS300 · updated
-
TPS calibration
Naturally AspiratedOkay, so I have read the tsrm for the calibration method and was wondering how exactly to apply that to an aftermarket ffim with an RMR 90mm throttle body. Am I even using the right TPS sensor? I have the factory 2jzge (cali spec) TPS sensor on the car. The issue I'm having is uncontrollable...- 14
- 782
Join now to ask and comment!