S
Supra93TT
·Guest
Joined
·
0 Posts
I'm not sure if theres any relation to this, but i've tried everything to get my boost controller working properly with no luck.
Zach
Zach
Would reseting my ECU possibly make my boost controller work to its full capacity?
Join the discussion
Recommended Reading
-
Traction Control
MKIV TechnicalHi, Just traded for my first manual 94 Supra Twin. I checked all of the vin tags and confirmed it is a twin. My car does not come with the traction switch in the console. I'm not sure if the previous owner removed it or if it was an option for the dealer. Can anyone confirm if this?- 2
- 56
-
2jzgte vvti head porting, opinions please
MKIV TechnicalHi everyone, I’ve been reading supra forums for months and months now. Love this page, and this is my first post. I’m about to port my vvti head and I have some questions pertaining to the valve guides. So, assuming my guides are within spec (it’s a low mile motor), what are your professional...- 2
- 111
-
2JZ GT86 · updated
-
Misfire issue, need some advice.
MKIV TechnicalNote: Car was perfectly fine before it’s last wash getting it ready for a photo shoot.(engine bay was sprayed with water). So I’m driving to the photo shoot location and I start noticing a misfire. The longer I drove it progressively got worse to the point where I would just get pretty good...- 0
- 58
-
JustA2jz · updated
-
Banjo bolt on fuel pump won't budge - ok to use impact wrench?
MKIV TechnicalGreetings, I'm having trouble removing the banjo bolt on the fuel pump assembly. Tried everything I could think of besides an impact wrench. Wanted to ask some folks if that was a good idea or not? I'd really appreciate any insight you can offer. To be clear and avoid miscommunication I found...- 1
- 68
-
shifting problems on automatic supra 2jzgte 330 hp
MKIV TechnicalI have some shifting problems on this supra with a 2jzgte and a automatic box attach, as my knowledge is limited on automatic as i have worked most on manual cars, i really need som help, i have taken a video of the problems, there is no error codes stored on the ecu.. i have heard that the...- 2
- 249
Join now to ask and comment!