Supra Forums banner

1 - 18 of 18 Posts

·
Or Am I?
Joined
·
169 Posts
Discussion Starter #1 (Edited)
Looking for the following:

80 amp Turbo Alternator

Lexus AFM

Walboro fuel pump

550 injectors

Oil Catch Can

CT-26 w/ NO shaft play (upgraded trim would be nice)

89+ molding

89+ tails w/ midsection

3 pc wing

Driver Side Fender (Prefer White)

Passenger Side Fender (Prefer White)

the list will grow as I think of more things.

Please let me know what you have, how much you want for it, and pics please.

pics to [email protected]

Thanks
Mike
 

·
Registered
Joined
·
420 Posts
I got an Apexi AVC-R Boost controller and some MKIV 550cc injectors if you would be interested. I can shoot you pics. BC is Brand NIB. Injectors has less than 100k. PM me if you want pics of both. I got them... LMK THX.
 

·
Supranian
Joined
·
2,007 Posts
TheOneAndOnlyDrone said:
turbo timern (HKS Type 0)
HKS 3000 Pipe (Stock pipe only)
boost controller (manual)
CT-26 w/ NO shaft play (minimal acceptable and bolt on)
Turbo Elbow (stock)
Downpipe (Stock)
89+ molding
89+ tails w/ midsection
3 pc wing (white, most of the hardware)
I have all the above parts that you are listing. PM if interested.
 

·
Supras are never 'done'
1989 Toyota Supra
Joined
·
601 Posts
kssweeper28 said:
http://i82.photobucket.com/albums/j246/MarkIIISupra/IMG_2085.jpg

^^^ Pic of the boost controller. BTW the injectors are the MKIV 550cc injectors. You will need the 2jz resistor pack to wire them into the 7m. LMK THX.
2JZ injectors are side feed, 7M are top feed. They don't even remotely fit. If they physically fit, you wouldn't need to change the resistor either. The 2JZ is SFI so unless you have an SFI ecu you would still use the 7M resistor pack.
 
1 - 18 of 18 Posts
Top