WTB: MKIV Intake manifold with Throttle Body
Join the discussion
Recommended Reading
-
How to Clean Flywheel bolt threads?
MKIV (1993-1998)Hi guys, There is some residue from the old loctite in these flywheel bolt holes, so I want to clean them before installing the new ARP flywheel bolts (with thread locker) Is it ok to spray the flywheel bolt holes with brake cleaner or will it cause problems? Also, whats is the best way to...- 0
- 11
-
New setup - built 3.0 VVTi with 6870 turbo
MKIV (1993-1998)Good evening Last year, I went from a stage 4 non-VVTi head to a stage 5 VVTi head ; on the same 6870 turbo. We put the Supra on the dyno before and after. Non-VVTi : 850 rwhp and 660 rwtq @ 2.1 Bar / 31 psi VVTi : 934 rwhp and 747 rwtq @ 2.3 Bar / 34 psi We overlayed the 2 curves : 700 rpm...- 7
- 208
-
Luxluc · updated
-
EGR Cooler Cap Gasket Alternative?
MKIV (1993-1998)Hi Supraforums family, I need to change my 26 year-old EGR cooler gasket on the back of the 2JZ-GE cylinder head by the firewall. However, no local toyota or Lexus dealership has these parts in stock and I need my car running by this Sunday. Can I use some kind of “gasket maker” that comes in...- 1
- 61
-
Exhaust Manifold Bolts with no washer?
MKIV (1993-1998)Hi Supraforums family, Is it okay to use exhaust manifold bolts without a washer or lock washer? Or, will they eventually back out or cause problems when the meta expands. I don’t have studs for all the exhaust manifold holes, so I just want this to work, but be safe too.- 3
- 162
-
Little help please, crank no start after a jump gone bad.
MKIV (1993-1998)First time posting here. Okay had a friend who "knew what I am doing get off my back" help jump the car in storage and the car blew the 120 amp fuse. The car is a 1997 twin turbo auto with minor upgrades and I think a jet programmed ecu. I replaced the 120 amp fuses, the others look to be...- 26
- 857
Join now to ask and comment!