Supra Forums banner
1 - 1 of 1 Posts

· 2005 LP640
1,548 Posts
Discussion Starter · #1 ·
Alright here's the deal. My ebc REFUSES to make the tial wg work.

Before I had it set up for an external setup with "IN" going to compressor nipple, "Out" to top port on wastegate, and the side port going to a vacuum source on the intake manifold.

Then I tried testing the wg. Ran a line straight from the compressor nipple to the side port on the wastegate. Worked fine and boosts a consistant 1 bar.

Hooked the ebc up for an actuator type wastegate, and now it doesn't work. What the hell is wrong with this stupid thing? It worked fine on my CT-26.

Any ideas? 1 bar of boost is fine for me on the street, but I want to occasionally crank the bitch up to about 20-22psi.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.