Supra Forums banner
1 - 1 of 1 Posts

·
TheFastCoonAss
Joined
·
6,086 Posts
To eliminate the waterfall, buy a FRAM fill kit. It comes with a tee that you permanantly add into the highest heater hose. Start your car with the heater on and radiator cap off, connect the garden hose to the tee, turn the water on slowly, when water comes out of the radiator neck, put the cap on, then turn the water off and disconnect the hose and make sure it's topped off. The tee has a screw on cap. Should be fully air free at this point.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top