Just like the title says. This is kind of of continuation of the thread MKIV's on Factory TT Wheels http://www.supraforums.com/forum/showthread.php?t=580277. I know there's several out there, and I'd like to get them all on one thread. Please post pics of your MKIII on MKIV TT wheels and any specs on tires, fender modifications, wheel widening, coilovers, ect...
ProjekT_SuprA
MKIII Supra's on MKIV TT Wheels
something we wanted to do with our extra set of mkiv rims, were actually have the fronts made into skinnies, like 17X4.5 figure if you can widen rims you should be able to shrink them
if you wanna do it right put a 20 mil spacer on both the front and back and get two pair of the 9.5 mkiv wheels so it sits flush other wise looks like shizzz....
Ha 315s wont work with a 20mm spacer. Not sure that will work on the front either, mine already grabs the fender lip sometimes when I hit a bump and turning sharp.
my bad yo! lol he got a hell of a deal on there...
btw we are having a BBQ for our midwestce.net crew if you didnt know...its going to be here in columbia...you should come
here is the thread for details
http://www.supraforums.com/forum/showthread.php?t=577074
btw we are having a BBQ for our midwestce.net crew if you didnt know...its going to be here in columbia...you should come
here is the thread for details
http://www.supraforums.com/forum/showthread.php?t=577074
Hi everyone! I just got a set of MKIV TT Wheels on my MKIII, my question is, Do I need a wheel spacer for both front and rear or just the front to make the wheels fit flushed? and if so, what size do I need for front and rear?
Also wanted to know if there is any issues (rubbing )or performance if I lower my car?
I am thinking about ordering LoTek Lowering springs 2 inches on front and 1.6 in the rear( I Want to keep my TEMS BC I like the handling but wanted to lower my car a bit)
what do you guys think?
anybody had any issues?
thoughts?
recommendations?
thank you ahead of time.
Also wanted to know if there is any issues (rubbing )or performance if I lower my car?
I am thinking about ordering LoTek Lowering springs 2 inches on front and 1.6 in the rear( I Want to keep my TEMS BC I like the handling but wanted to lower my car a bit)
what do you guys think?
anybody had any issues?
thoughts?
recommendations?
thank you ahead of time.
A little thread resurrection, lol. I used Eibach springs to lower mine, and only used spacers on the front. However, for the life of me I can't remember the exact thickness of them, but can measure them sometime in the next few weeks (I work away from where I keep my car).
![Image]()
[/url]Supra SF by wera172[/IMG]
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
